Japspeed Front Mount Intercooler kit
The Japspeed intercooler is constructed entirely of high quality 6061 aluminum and the core is 100% vacuum brazed. The polished aluminum end tanks are hand TIG welded for a perfect fit. The ambient fin pitch has been adjusted to provide an optimal fin density of 15 fins/inch. This gives the intercooler excellent flow properties as well as a large cooling surface area, and the efficient core takes advantage of these properties.
The four threaded mounting points along the top and bottom of the intercooler make installation simple. Typical installations require little to no modifications to the vehicle.
Features & Specs
* All TIG Welded 6061 Aluminum, polished end tanks
* 100% Vacuum Brazed Core
* High Efficiency Bar Plate | Tube Fin Construction
* 3 popular Sizes available; Custom made size welcomed
* Inlet/Outlet: 2.5inch | 3inch | custom size
* Max Recommended PSI: 45psi
* Low pressure drop w/ only 0.2psi at 15psi of boost
* Tested CFM: 1020 CFM
* Fin Pitch: 15 Fins/Inch
* Four Threaded Universal Mounting Points
£250.00 + £12.00 Del.
Blitz Front Mount Intercooler Kit
£900.00 + £12.00 Del.
HKS Front Mount Intercooler Kit
£850.00 + £12.00 Del.
Greddy Spec R Front Mount Intercooler Kit
£975.00 + £20.00 Del.
Arc Uprated Top Mount Intercooler
ARC intercoolers are designed to get maximum cooling for turbo charged vehicles. ARC company in Japan has done extensive research and testing to make sure that the intercoolers they make are the most efficient and functional products in the market. The inner structure was designed so that a large volume of air can be traveled through and as free flowing as possible, and the outer fins were pushed backward to make sure all the air can travel to cool down the intercoolers.
The Standard Position or Genuine Exchange version of the ARC intercooler is designed to mounted and almost the exact same size of the standard intercooler.
£925.00 + £12.00 Del.
100% Aluminium Radiators available in 2 sizes. Stock replacement
30% better cooling
26mm £255.00 + £12.00 Del.
40mm £295.00 + £12.00 Del.
Zep Racing 2 Row Aluminium Radiator
£420.00 + £12.00 Del.
Zep Racing 3 Row Brass Radiator
The radiator has a brass core and has 1.6 times the capacity of the ZEP 2-row unit
and is strictly for serious Starlet tuning.
£865.00 + £12.00 Del.
Sard Racing Radiator
The SARD Racing Radiator has a full aluminum 2-row core engineered to regulate
water temperatures and guard against overheating caused from extended hard driving. Sard has maximized heat dissipation through careful research and development.
Through core development, fin and tube pitch has been refined to bring you the coolest, most cost effective radiators. These items are a bolt-on application which can be used with the OEM fans and shrouds. Tests with the Racing Radiator have shown to consistently drop both OIL and WATER temperatures 5~10 degrees Celcius) (41~50 degrees Fahrenheit).
£795.00 + £12.00 Del.
Okoyama Carbing Aluminium Radiator Cooling Panel EP91
£130.00 + £8.00 Del.
Greddy Oil Cooler Kit
£650.00 + £12.00 Del.
Sard Racing Oil Filter Relocation Kit
This relocation kit not only adds to the ease of your oil changes by making the oil filter easier to access but also enhances the overall under hood look of your vehicle. Coupled with the oil cooling block this makes an easily accessible tool for oil filter changes and gauge sender connection. Supplied with all ancillaries to fit
£265.00 + £8.00 Del.
Sard Racing Anodised Aluminium Oil Cooling Block
Sard Anodized Aluminum Cooling Oil Block. This unit can be used with the Sard Peak Hold Warning Pro Meter EL units. This Oil Cooling block not only adds to the heat dissipation ability of your engine but also gives you a place to mount your oil gauges
and enhances the overall under hood look of your vehicle. This unit comes in three sizes and it will be up to you to tell us what make and model your car and engine are. The dimentions and screw size are as follows. Size 1: 65 mm diameter with a 3/4-16UNF screw size Size 2: 65 mm diameter with a M20-P1.5 screw size Size 3: 75 mm diameter with a 3/4-16UNF screw size.
£80.00 + £8.00 Del.
Cusco Radiator Cap 1.3 Bar
£32.00 + £6.00 Del.
Sard Radiator Cap 1.3 Bar
£32.00 + £6.00 Del.
Sard Low Temperature Thermostat
£58.00 + £6.00 Del.
EP82/91 Silicone Coolant hoses
Blue/Red
£47.00 + £8.00 Del.
Samco Coolant Hose Kit EP82/91
£60.00+ £8.00 Del.
Samco Turbo Hose Kit EP82/91
£82.50 + £8.00 Del.
Cusco Intercooler Sprayer
This water sprayer controller unit allows the user to set specific intervals and rpm levels for the water sprayer to turn on and off. Whether you want a continuous spray for 30 seconds, an interval of one spray every 7 seconds, or a combination of different numbers, this controller has it covered to keep your intercooler temperatures down to a minimum. Universal for any vehicle.
Complete wuth CUSCO IWC Nozzle Kit spray controller, this allows the radiator to be cooled off as well as the intercooler.
£165.00 + £12 Del.
Call 07921 256993 if you wish to to order by phone
Please note all our prices are exactly what you pay. No hidden drop shipping charges or Paypal fees.
All parts(stock items) are sent either by next day courier, Royal Mail Special Delivery or smaller items by first class post